LED Street light  DF-710

Characteristics description of the LED Industrial Lights:
1) Uses single powerful LED(10W–50W) as the light source , using our proprietary LED encapsulation.
2) Utilizes the special design of multichip single module. Imported high brightness semiconductor chips.
3) Integrative design for heat sink and housing; The LED is closely connected to the surface. The heat from LED is removed through the heat dissipation wing and also by the air ventilation. The design ensures a 50,000 hours life-span for the LED. If it works 12 hours per day, it can work over 10 years.
4) The maintenance charges are much lower than other street lights.
5) The die-casting aluminium alloy housing is effective in waterproofing and dust prevention. It also helps in removing the heat properly. The surface of the light is specially treated, so it is able to bear an ultraviolet ray and resist to corrosion. The whole light meets the standard of IP65.
6) Uses monomer ellipse reflector with spheroid cambered surface so it can control the LED light pertinently in a needed area. This special design can improve the uniformity of the light and the utility ratio of the energy used.
7) Compared with traditional sodium lights, it can save electricity more than 70%.
8) No ill glare; no abrupt and frequent flashes. The design ensures that bad glare is eliminated,vision fatigue and disturbance aroused by traditional streetlight and also can improves the safety of the driving.
9) No delay start; no waiting. It can reach its normal light as soon as it is turned on. And avoid the long time start process of the traditional lights.
10) Environment friendly. Does not have lead, hydrargyrum, and any other contamination. No pollution to the air.
11) It’s an excellent partner of the Solar panel system. It can exert many merits such as working with direct current and lower voltage. It is power saving and environment friendly. The connection of the solar panel and LED light sources provide high reliability.

Mail technic parameer&index: